Development of a Low-Cost Electronic Wheelchair with Obstacle Avoidance Feature
A low-cost electronic wheelchair was designed and developed which can perform the similar functions and features as a commercially available wheelchair. It also provides obstacle avoidance capability as added value. The electronic wheelchair was realized by modification of a lightweight manual wheelchair. It uses two electric motors each of 320 W 24 V DC, 5-24 VDC 6 A H-bride drivers, and a 12 V 17 Ah rechargeable lead acid battery. It equipped with switches, joystick, infrared sensors and ultrasonic sensors. A GizduinoAtMega 328 microcontroller is used to read and interpret commands. User’s acceptance evaluation results shows that the developed low-cost wheelchair is able to receive and interpret commands provided by the joystick, detect if a person is seated on it, navigate to avoid obstacles as well as to detect edge and stairs. Technical evaluation result shows that on a flat surface it could move at the speed of around 39.9 m/minute without load and 32 m/minute with 80 kg load. At 10 degrees inclined surface, the maximum weight limit is 30 kg with the speed of 12 m/minute. At 20 degrees inclined surface, the maximum weight limit is 10 kg with the speed of 3 m/minute. Regarding cost, it is just a fraction of a cost compared to the commercially available model. Therefore, the developed wheelchair offers an option for potential users who cannot afford to buy the commercially available one.
Metrics powered by PLOS ALM
- There are currently no refbacks.
Copyright (c) 2015
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
1. Cyber Physical Autonomous Mobile Robot (CPAMR) Framework in the Context of Industry 4.0
Yoon Ket Lee, Yeh Huann Goh, Yiqi Tew, J. Detand, D. Ruxu
MATEC Web of Conferences vol: 167 first page: 02005 year: 2018