A compact design of multi-feeder data logging system for power quality measurement with a multiplexer and a single PQ transducer
This paper presents a simple and costs effective equipment design multi-feeder data logger for recording and monitoring power quality. The system design uses remote supervising and multi-feeder data logging system (RESMOS). The data collected through resmos portable unit (RMPU) will automatically be saved with the format as binary and comma separated value (CSV). The time setting on the RMPU can be configured with minimum one minute per logging. This data logger uses a single transducer with a multiplexer for recording and monitoring ten channels of power quality at busbar. The system design has been validated with national metrology laboratory scientific and industrial research institute of Malaysia (SIRIM). This tool has the advantage that it can be used to measure harmonic data more than 21st at the same time for ten channels and equipped with software making it easier for analysis data with low operational costs versus another power quality equipment. The experimental results indicate that the proposed technique can accelerate data reading with conversion rate one sample per second for each channel. The device can be used to measure harmonic level and power quality with a confidence level above 95% and percentage error under 2.43% for total harmonics distortion (THD) and 1.72% for voltage harmonics.
Hendri N.S and K. M.N, Remote supervising and monitoring multi-channel data logging system. Electrical Energy and Industrial Electronic System (EEIES 2009) on 7th-8th December 2009.
S. Saha et al., “Design of Low Cost Multi Channel Data Logger,” ARPN J. Eng. Appl. Sci., vol. 1, no. 1, 2006.
A. Kumar et al., “Design and Development of Multi-channel Data logger for Built Environment,” in Proceedings of the International Multi Conference of Engineers and Computer Scientists IMEC, Hong Kong., vol.II, March, 2010.
D. M. Said and K. M. Nor, “Simulation of the impact of harmonics on distribution transformers,” in 2008 IEEE 2nd International Power and Energy Conference, 2008, pp. 335–340.crossref
Khalid M.N., “The Malaysian Standards on Power Quality in the Last Decade (2000-2010). PQS 2010,” in Power Quality Symposium 2010, Kuala Lumpur, July 13-14, 2010.
G. H. Kjolle et al., “Customer Costs Related to Interruptions and Voltage Problems: Methodology and Results,” in IEEE Transactions on Power Systems, 2008, vol. 23, no. 3, pp. 1030–1038.crossref
Jonathan Manson and Roman Targosz, “European Power Quality Survery Report, Leonardo Energy, Vol. 1204, November,” 2008.
A. Prudenzi et al., “Power quality survey on Italian industrial customers: Paper industries,” in 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century, 2008, pp. 1–5.crossref
S. Elphick et al., “The Australian Long Term Power Quality Monitoring Project,” in 2008 13th International Conference on Harmonics and Quality of Power, 2008, pp. 1–6.crossref
E2I/EPRI, “Assessing Power Quality Impacts and Solutions for the California Food-Processing Industry, California Energy Commission Public Interest Energy Research Program,” 2005.
R. Targosz and J. Manson, “Pan-European power quality survey,” in 2007 9th International Conference on Electrical Power Quality and Utilisation, 2007, pp. 1–6.crossref
Neville R. Watson, “Power Quality, a New Zealand perspective,” in Power Quality Symposium (PQS 2010), Kuala Lumpur, July 13-14, 2010.
M. A. Eldery et al., “A Novel Power Quality Monitoring Allocation Algorithm,” IEEE Trans. Power Deliv., vol. 21, no. 2, pp. 768–777, Apr. 2006.crossref
Dalila M. S. and Khalid M.N., “Effects of Harmonics on Distribution Transformers,” in Australasian Universities Power Engineering Conference (AUPEC’08), Sydney Australia, December 14-17, 2008, pp. 1–5.
Roman Targosz, “End use perceptions of Power Quality – A European Perspective,” in EPRI Power Quality Applications (PQA) and Advanced Distribution Automation (ADA) Joint Conference and Exhibition, European Copper Institute, June 12, 2007.
Metrics powered by PLOS ALM
- There are currently no refbacks.
Copyright (c) 2017 Journal of Mechatronics, Electrical Power, and Vehicular Technology
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.